205 GTI Fore16ver

[cybernck]

Yes, but I knew about it, so it was no surprise .

Still, there will be some serious work required!

[Pipes2101]

You come's from Banja Luka?
Or is this an old sticker on the frontglas?
Verry nice car's by you're side i wish you god luck and a lot of fun with it.
Best regard's: Hans-Peter

PS An die Deutschen: Ja mein English ist kakke ich weis aber der Wille zählt

[peugeot-fan91]

You come's from Banja Luka?
Or is this an old sticker on the frontglas?
Verry nice car's by you're side i wish you god luck and a lot of fun with it.
Best regard's: Hans-Peter

PS An die Deutschen: Ja mein English ist kakke ich weis aber der Wille zählt

alter vatter

aber so sehe ich es auch der wille zählt mein französisch sieht auch nicht besser aus

[cybernck]

.





<------ Yes, I'm from Banja Luka

[cybernck]

Episode 7: Awakening


Most of the 2013 went by without having anything done on the car, purely because I couldn't find
anyone to take on the work of fixing the chassis and rust patches. However, near the end of the year,
it was time to continue the restoration work.



All the rear bumpet bolts were rusted up solid, as expected.



Stripping off the remaining bits in the engine compartment and also the interior.
Only God knows how will I put it all back together!



To be continued...


Full size photos: http://photos.cybernck.com/205gtifore16ver?page=3

[cybernck]

Episode 8: One Horse Power


During my hunt for parts, I managed to find just what I need - NOS replacement headlight panels!
I've also finally managed to acquire an "auto bonnet" - i.e. a bonnet off of a 205 Automatic.
It's not in the best shape, but it's crucial for my vision of this car :-).



Anyway, the second day of dismantling was mostly easy work. The front wings are reusable, but I'm
on a look-out for a pair of new ones - which are proving very difficult to get hold of now-days.



The front part of the floor pan would have been perfect, if it wasn't for a crack from the known crash,
while the culprit for the damage in the rear part were the holes in the tailgate and LPG installation.
There's just a small usual rusty patch under the rear seats.



Awaiting pickup, to be transferred to the bodyshop.




Full size photos: http://photos.cybernck.com/205gtifore16ver?page=3

[cybernck]

Episode 9: Cut

The car arrived at the body shop and it was time to finally start going in the direction of having a rust-free 205 shell.



The chassis had been pulled back to OEM specification, doors put back on using larger pins and body panel gaps set.
Then the crash-damaged rotten corner section was cut off.



Out with the cancer!



Next up, the replacement part I had sourced earlier had to be trimmed and a good inner wing panel fitted back on the car,
along with the brand new headlamp panels.




To be continued...


Full size photos: http://photos.cybernck.com/205gtifore16ver?page=3

[cybernck]

Episode 10: Paste


Ta-daa! Inner wheel arch welded on, as well as the new headlamp panels. Looks infinitely better
than the old mix of filler and rotten metal! Pretty seamless transition of the car's chassis and
the new part - it will look as new when it sees some paint.



The other side has seen some grinder action too. Another culprit and often overlooked area is
the bottom of the A-post.



The fuel tank has been dropped and the floor cleaned up with the boot floor section left to sort out.



Meanwhile, I decided to take a look at my very low mileage XU9J4Z 405 Mi16 engine I bought back in 2007,
that has been removed out of an 405 Mi16x4, crashed 10 years earlier, in 1997, with only 35 thousand
kilometers on the clock!




To be continued...


Full size photos: http://photos.cybernck.com/205gtifore16ver?page=4

[cybernck]

Episode 11: Solid foundation


Back at the panel beater's, the car has had most of the major body work done. Facial reconstruction
surgery complete. The red arrows are there to sway your attention towards removable lower section,
for ease of maneuvering the engine in at a later date.



The Automatic bonnet has seen better days, but I'm very happy to see it on the car none-the-less!
Some crude work has been done on the exterior too. The doors are rather rippled, but it will all be
sorted out, when the time comes. The hole in the floor patched, along with a few more in the front arches.




The car stayed at the bodyshop for some finishing touches while I was on a tour around Bosnia,
filling the car up with various 205 parts, including another (and hopefully better) Auto bonnet!



Also, I dug these wheels out, that I had purchased a while ago, with an intention of making
a transportation device for a bare 205 shell, heavy parts such as engines and apparently
cyclists too :-).




On the last day of 2013, I got the car back, fully rust-free and ready to go to the painters.
I've even had to rent out yet another garage, as the old one got filled with all sorts of parts
in the mean time!




Full size photos: http://photos.cybernck.com/205gtifore16ver?page=5

[Pipes2101]

WOW Amazing